Unit And Component Identification - Carrier AERO 39MN Installation, Start-Up And Service Instructions Manual

UNIT AND COMPONENT IDENTIFICATION

The 39M air handler comes in two basic configurations;
horizontal and vertical. Using appropriate sections, it is possi-
ble to design many unit variations, including blow-thru units
and plenum fan units with multiple discharges. See Fig. 1A
and 1B for nameplate label identification. Fig. 2A-2I show an
example of the model number used for 39M unit sections and
components. Each unit's model number is listed on a label af-
fixed to the fan section. Section and major component level
Fig. 1A — Unit Nameplate Label
(Found on Each Component Section
Shipped Separately)
part numbers are listed and affixed to each individual compo-
nent section.
For further information on unit and component identification
contact your Carrier representative for the AHUBuilder
gram. Refer to the 39M Product Data catalog for more informa-
tion on individual component sections. Refer to Fig. 3 and 4 and
Tables 1-18 for component data.
a39-3998
4
Fig. 1B — Section Nameplate Label
(Each Component Section will have
a Section Nameplate Label)
® pro-
a39-3999