Installation - Planet HDP-5240PT User Manual

3.2 Installation

The HDP-5240PT is constructed of four parts as shown below. Prior to the installation, the installer is required
to remove the front panel of the HDP-5240PT for wall mounting. Please follow the steps below for the
installation.
Step 1: Installation Preparation
A. Check the following contents:

Hex wrench x 1

RJ45 plugs x 2 (1 spare)

KA4 x 25mm screws x 4

25mm screw anchors x 4
B. Tools that may be required:

Hex wrench

Phillips screwdriver (Ph2 or Ph3), hammer, RJ45 crimper

Electric impact drill with a 6mm drill bit.
Figure 1 Three Major Parts of HDP-5240PT
25
720p SIP Multi-unit Video Door Phone with RFID and PoE
HDP-5240PT