Table of Contents
Advertisement
b.
Purple part (host: port)
It is a set of addresses and ports to listen, separated by a colon.
c.
Pink part (index / priority)
Multicast is a sign of listening, but also the monitoring multicast priority. The smaller number refers to higher
priority.
d.
Red part (priority)
It is the general call, non-multicast call priority. The smaller number refers to higher priority. The following
would explain how to use this option:
(a) The purpose of setting monitoring multicast "Group 1" or "Group 2" or "Group 3" is to launch a
multicast call.
(b) All equipment has one or more common non multicast communication.
(c) When you set the priority as disabled, any level of multicast would not be answered , multicast call is
rejected.
(d) When you set the priority as some value, only the multicast higher than the priority can come in. If
you set the priority as 3, group 2 and group 3 would be rejected, for its priority level is equal to 3 and
less than 3; multicast 1 priority is set up with 2, higher than ordinary call priority, device can answer
the multicast message, at the same time, holding the other call.
e.
Green part (Enable Page priority)
Set whether to open multicast comparison function, multicast priority is pink part number. The following
explains how to use:
(a) The purpose of setting monitoring multicast "group 1" or "group 3"is listening "group of 1" or "group
3"multicast call of multicast address.
(b) The device has a path or multi-path multicast calls, such as listening to "multicast information group
2".
(c) If multicast is a new "group 1", and because the priority of group 1" is 2, higher than the current call
priority 3 of "group 2", so multicast call would come in.
(d) If multicast is a new "group 3", and because the priority of group 3" is 4, lower than the current call
priority 3 of "group 2", the device would listen to the "group 1" and maintain the "group 2".
Multicast service
(C)
a.
Send:
When you configure the item, pressing the corresponding key on the equipment shell, equipment would
directly enter the Talking interface; the premise is to ensure no current multicast call and three-way
conference, so the multicast can be established.
720p SIP Multi-unit Video Door Phone with RFID and PoE
64
HDP-5240PT
Advertisement
Table of Contents
