Table of Contents
Advertisement
Auto Provision
Field Name
General Configuration File
Encryption Key
Save Auto Provision
Information
DHCP Option
Option Value
Custom Option Value
SIP Plug and Play (PnP)
Enable SIP PnP
Server Address
Server Port
Transportation Protocol
Update Interval
Static Provisioning Server
Server Address
Configuration File Name
Protocol Type
Update Interval
Update Mode
TR069
Enable TR069
ACS Server Type
ACS Server URL
ACS User
ACS Password
TR069 Auto Login
Explanation
Encryption key for common configuration file
Save the auto provision username and password in the phone until the
server URL is changed
The equipment supports configuration from Option 43, Option 66, or a
Custom DHCP option. It may also be disabled.
Custom option number. It must be from 128 to 254.
If it is enabled, the equipment would send SIP SUBSCRIBE messages to
the server address when it boots up. Any SIP server compatible with that
message would reply with a SIP NOTIFY message containing the Auto
Provisioning Server URL where the phones can request their
configuration.
PnP Server Address
PnP Server Port
PnP Transfer protocol – UDP or TCP
Interval time for querying PnP server. Default is 1 hour.
Set FTP/TFTP/HTTP server IP address for auto update. The address can
be an IP address or domain name with subdirectory.
Specify configuration file name. The equipment would use its MAC ID as
the config file name if this is blank.
Specify the Protocol type FTP, TFTP or HTTP.
Specify the update interval time. Default is 1 hour.
1. Disable – not to update
2. Update after reboot – update only after reboot.
3. Update at time period – update at periodic update period
Enable/Disable TR069 configuration
Select Common or CTC ACS Server Type.
ACS Server URL.
User name of ACS.
ACS Password.
Enable/Disable TR069 Auto Login.
39
720p SIP Multi-unit Video Door Phone with RFID and PoE
HDP-5240PT
Advertisement
Table of Contents
