Table of Contents
Advertisement
Features
Field Name
Door Unlock Indication
Remote Code Check
Length
Block Out Settings
Add or delete blocked numbers – enter the prefix of numbers which should not be dialed by the phone. For
example, if 001 is entered, the phone would not dial any number beginning with 001.
X and x are wildcards which match single digit. For example, if 4xxx or 4XXX is entered, the phone would
not dial any 4 digits beginning with 4. It would dial numbers beginning with 4 which are longer or shorter
than 4 digits.
B. Audio
This page configures audio parameters such as voice codec, speakerphone volume, mic volume and ringer
volume.
Audio Setting
Field Name
First Codec
Second Codec
Explanation
Indication tone for door unlocked. There are 3 types of tone: silent, short beeps
and long beeps.
The remote access code length would be restricted with it. If the input access code
length is matched with it, system would check it immediately. Initial length is 4.
Explanation
The first codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB
The second codec choice: G.711A/U, G.722, G.723.1, G.726-32, G.729AB, None
720p SIP Multi-unit Video Door Phone with RFID and PoE
58
HDP-5240PT
Advertisement
Table of Contents
