Hardware Installation; Initial Utility Installation - Planet HDP-1100PT User Manual

2.2 Hardware Installation

Step 1: Surface-mount the HDP-1100PT SIP IP video door phone in a desired location.
Step 2: Put the Ethernet cable through the square hole, measuring 35 x 35mm.
Step 3: Fix the door phone on the wall using a roof or a panel and two screws as shown below:
Step 4: Connect the HDP-1100PT to IEEE802.3af/at POE switch or router via RJ45 cable.

2.3 Initial Utility Installation

This chapter shows how to use utility to find the IP of your
the default settings. However, to help you find the networked door phone quickly, the windows
utility PLANET Smart Discovery can search
configure some basic settings before you start advanced management.
Please download the search tool from Planet download center:
Step 1:
Step 2. Connect the NC of HDP-1100PT and Button of anode lock
together.
Step 3. Provide the power to anode lock and HDP-1100PT. When the
anode lock is powered by 12VDC, the anode lock would switch to
lock location.
Step 4. Press the Open door button to open door by mobile phone.
door phone
9
720p SIP Door Phone with PoE
HDP-1100PT
Panel
door phone. The door phone is with
in the network that can help you to