Table of Contents
Advertisement
multicast session currently. When page priority switch is enabled, the device would automatically ignore the
low priority multicast RTP streams but receive top-level priority multicast RTP streams, and keep the current
multicast session in the current status. If it is not enabled, the device would automatically ignore all receiving
multicast RTP streams.
c.
Web Settings:
The multicast SS priority is higher than that of Group B; Group A has the highest priority.
When you press the multicast key for multicast session, both multicast sender and receiver
would beep.
Listener configuration
(B)
a.
Blue part (name)
"Group 1", "Group 2" and "Group 3" are your setting monitoring multicast names.The group name would be
displayed on the screen when you answer the multicast. If you have not set, the screen would display the IP:
port directly.
720p SIP Multi-unit Video Door Phone with RFID and PoE
63
HDP-5240PT
Advertisement
Table of Contents
