Specifications; Additional Resources - Rockwell Automation Allen-Bradley 1756-EN2TSC Installation Instructions Manual

Specifications

Attribute
Voltage and current ratings
Temperature, operating
IEC 60068-2-1(Test Ad, Operating Cold)
IEC 60068-2-2 (Test Bd, Operating Dry Heat)
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
Temperature, surrounding air
Enclosure type rating
Isolation voltage
Wire size
NA temp code
ATEX temp code
IECEx temp code

Additional Resources

These resources contain information about related products from Rockwell Automation.
Resource
EtherNet/IP Modules Installation Instructions, publication
Ethernet Design Considerations Reference Manual, publication
EtherNet/IP Secure Communication User Manual, publication
EtherNet/IP Network Configuration User Manual, publication
EtherNet/IP Embedded Switch Technology Application Guide, publication
ENET-AP005
EtherNet/IP Media Planning and Installation Manual
This manual is available from the Open DeviceNet Vendor Association (ODVA)
at http://www.odva.org
You can view or download Rockwell Automation publications at
copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.
1756-EN2TSC
5.1V DC, 1 A
0...60 °C (32...140 °F)
60 °C (140 °F)
None (open-style)
30V (continuous), Basic Insulation Type, Ethernet to Backplane, USB to Backplane, and USB to Ethernet, Type
tested at 860V AC for 60 s
Ethernet connections: RJ45 connector according to IEC 60603-7, 2 or 4 pair Category 5e minimum cable
according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702.
T4A
T4
T4
Description
ENET-IN002 Provides details on how to install and configure EtherNet/IP communication modules.
ENET-RM002 Provides details about how to use EtherNet/IP communication modules with Logix5000™ controllers and
communicate with other devices on the EtherNet/IP network.
ENET-UM003 Provides information on system architecture, configuring secure communication, and diagnostics.
ENET-UM001 Describes how you can use EtherNet/IP communication modules with your Logix5000 controller and communicate
with various devices on the Ethernet network.
Provides details about how to install, configure, and maintain linear and Device-level Ring (DLR) networks by
using Rockwell Automation EtherNet/IP devices equipped with embedded switch technology.
Provides details about how to use the required media components and provides information on how to plan for,
install, verify, troubleshoot, and certify your EtherNet/IP network.
Rockwell Automation Publication 1756-IN618A-EN-P - September 2015
http://www.rockwellautomation.com/literature/.
1756 EtherNet/IP Secure Communication Module
To order paper
11