Dell EMC PowerVault ME4 Series Deployment Manual page 28

Figure 25. Connecting hosts: ME4 Series 5U direct attach – four servers, one HBA per server, dual path
1. Server 1
3. Server 3
5. Controller module A
Dual-controller module configurations – switch-attached
A switch-attached solution—or SAN—places a switch between the servers and the controller enclosures within the storage system.
Using switches, a SAN shares a storage system among multiple servers, reducing the number of storage systems required for a particular
environment. Using switches increases the number of servers that can be connected to the storage system.
NOTE: About switch-attached configurations:
• See the recommended switch-attached examples for host connection in the
ME4 Series Storage System document that is provided with your controller enclosure.
• See Figure 18. Two subnet switch example (IPv4)
an IPv4 network.
Figure 26. Connecting hosts: ME4 Series 2U switch-attached – two servers, two switches
1. Server 1
3. Switch A
5. Controller module A
28 Cable host servers to the storage system
2. Server 2
4. Server 4
6. Controller module B
for an example showing host port and controller port addressing on
2. Server 2
4. Switch B
6. Controller module B
Setting Up Your Dell EMC PowerVault