I/O Address And Dma Channel Jumpers - IBM RT PC Options Installation

I/O Address and DMA Channel Jumpers

The I/O Address and DMA Channel Jumpers have two settings
each. If you are using two Multiprotocol Adapters, ensure that each
adapter is set to a different DMA channel. For more information,
refer to "Adapter Conflicts" on page 1-19.
Set the jumpers as shown below.
Installing: You can install this adapter in slots 2, 4, 5, 7, or 8
in IBM 6150 and in slots 2, 3, 4, or 5 in IBM 6151, whichever is
available. See the system unit diagram for the correct adapter slot.
Section 6. Communication and Network Adapter Options 6-21