I/O Address And Dma Channel Jumpers - IBM RT PC Options Installation

TNL SN20-9864 (May 1987) to 75X0217
I/O Address and DMA Channel Jumpers
0510·
052F
I/O
Address
0910·
092F
The I/O Address and DMA Channel Jumpers have two settings each.
If you are using two Multiprotocol Adapters, ensure that each adapter is set
to a different interrupt level. For more information, refer to "Adapter
Conflicts" on page 1-19.
Set the jumpers as shown below.
DMA Channel
1
5
Illffalling:
You can install this adapter in slots 2, 4, 5, 7, or 8 in IBM 6150
and in slots 2,3,4, or 5 in IBM 6151, whichever is available. See the
system unit diagram for the correct adapter slot.
Section 6. Communication and Network Adapter Options 6-19