en
68 | FWA 4650 | Software installation
9.2.3
Installation program
i
The program provides menu-driven prompting for
installation.
Fig. 70:
Measurement program installation Welcome window
1. Press the "Continue" button.
Fig. 71:
Measurement program installation Start window
2. Press the "Continue" button.
|
1 690 706 220
2014-01-31
Fig. 72:
Licence key query window
The licence key query window is displayed.
3. Click onto the "Browse" button.
The file manager opens up.
4. Select the drive and licence key file (extension: .lic).
Installation continues automatically if the licence
key is valid.
i
The licence key can also be entered directly in the
form of a code.
i
The licence key query window is not called up in the
case of a software package with multiple licence.
i
Following completion of installation:
5. Remove the USB data carrier and CD/DVD from the
PC/ Laptop.
6. Re-start the PC/ Laptop.
i
After installation, there will be a menu entry in the
"All programs" menu and a folder for the measure-
ment program on the Desktop. The software is also
linked to the Autostart folder and starts up automati-
cally after booting the PC/ Laptop.
!
In the case of FWA 4650 wheel alignment units, the
network has to be configured after installing the
measurement program.
i
Refer to the "Network" Section for network configu-
ration.
!
In the case of 3D-12Cam wheel alignment units,
the positions of the sensors must be assigned after
installing the measurement program.
i
For sensor position assignment, refer to the docu-
ment Commissioning instructions for FWA 4630
1690706006.
"
This completes measurement program installation.
Robert Bosch GmbH