Advertisement
O
NOTE: If for some reasons, the
vehicle cannot be started elec-
trically, place ignition key to ON posi-
tion and start engine manually.
Should the rewind starter rope fray and
break, the engine can be started with
an emergency starter rope.
Remove the rewind starter assembly
from the engine and transfer the rope
handle to your emergency rope.
Wind rope around starting pulley.
Single Cylinder Engine
O
NOTE: On Elan twin cylinder, the
knot
of the emergency rope
should be positioned behind one
bolt head of the pulley.
Elan Twin Cylinder
Pull vigorously as per usual manual
starting to start engine.
•
WARNING: Do not start the vehi-
cle by the drive pulley unless it is
a true emergency situation, have the
vehicle repaired as soon as possible.
Remove pulley
from vehicle and
wind the emergency rope tight around
the drive pulley between the sliding
half and the roller guard. Start engine
as per usual manual starting.
•
WARNING: When starting the
vehicle in an emergency situation
by the drive pulley, do not make a knot
at the end of the emergency rope and
do not reinstall the pulley guard.
11
Advertisement
