Power Up; Power Up The Board; Source Code And Technical Support - Atmel SAM4E-EK User Manual

Power up

3.

Power up the board

3.1
Unpack the board taking care to avoid electrostatic discharge. Unpack the power supply, select the right power plug
adapter corresponding to that of your country, and insert it into the power supply.
Connect the power supply DC connector to the board and plug the power supply to an AC power socket.
The board LCD should light up and display a welcome page. Then click or touch the icons displayed on the screen and
enjoy the demo.

Source code and technical support

3.2
After boot up, you can run some sample code or your own application on the development kit. You can download
sample code and get technical support from the Atmel web site: http://www.atmel.com.
Downloaded from Elcodis.com electronic components distributor
SAM4E-EK User Guide
42067A−SAM4E−01/2013
6