Parksense Sensors; Parksense Warning Display - Jeep Grand Cherokee Operating Information Manual

indicating the vehicle speed is too fast. The
system will become active again if the vehicle
speed is decreased to speeds less than ap-
proximately 6 mph (9 km/h).

ParkSense Sensors

The four ParkSense sensors, located in the rear
fascia/bumper, monitor the area behind the
vehicle that is within the sensors' field of view.
The sensors can detect obstacles from approxi-
mately 12 in (30 cm) up to 79 in (200 cm) from
the rear fascia/bumper in the horizontal direc-
tion, depending on the location, type and orien-
tation of the obstacle.

ParkSense Warning Display

The ParkSense Warning screen will only be
displayed if Sound and Display is selected from
the Customer - Programmable Features section
of the Uconnect System. Refer to "Uconnect
Settings" in "Understanding Your Instrument
Panel" for further information.
The ParkSense Warning screen is located
within the DID. It provides visual warnings to
indicate the distance between the rear fascia/
bumper and the detected obstacle. Refer to
"Driver Information Display (DID)" for further
information.
ParkSense Display
When the vehicle is in REVERSE and an ob-
stacle has been detected, the warning display
will turn ON indicating the system status.
Park Assist Ready
The system will indicate a detected obstacle by
showing a single arc in the left and/or right rear
regions based on the obstacle's distance and
location relative to the vehicle.
If an obstacle is detected in the left and/or right
rear region, the display will show a single arc in
the left and/or right rear region and the system
will produce a tone. As the vehicle moves closer
to the obstacle, the display will show the single
arc moving closer to the vehicle and the tone
will change from a single 1/2 second tone to
slow, to fast, to continuous.
Single 1/2 Second Tone
123