Power Lumbar - If Equipped; Manual Front Seats Forward/Rearward Adjustment - Jeep Grand Cherokee Operating Information Manual

WARNING! (Continued)
• Seats should be adjusted before fastening
the seat belts and while the vehicle is
parked. Serious injury or death could result
from a poorly adjusted seat belt.
• Do not ride with the seatback reclined so
that the shoulder belt is no longer resting
against your chest. In a collision you could
slide under the seat belt, which could
result in serious injury or death.
CAUTION!
Do not place any article under a power seat
or impede its ability to move as it may cause
damage to the seat controls. Seat travel may
become limited if movement is stopped by an
obstruction in the seat's path.
Power Lumbar — If Equipped
Vehicles equipped with power driver or passen-
ger seats may also be equipped with power
lumbar. The power lumbar switch is located on
80
the outboard side of the power seat. Push the
switch forward to increase the lumbar support.
Push the switch rearward to decrease the lum-
bar support. Pushing upward or downward on
the switch will raise and lower the position of the
support.
Power Lumbar Switch
Manual Front Seats Forward/
Rearward Adjustment
Some models may be equipped with a manual
front passenger seat. The seat can be adjusted
forward or rearward by using a bar located by
the front of the seat cushion, near the floor.
Adjustment Bar
While sitting in the seat, lift up on the bar located
under the seat cushion and move the seat
forward or rearward. Release the bar once you
have reached the desired position. Then, using
body pressure, move forward and rearward on
the seat to be sure that the seat adjusters have
latched.