Jeep Grand Cherokee Operating Information Manual page 357

Jack Warning Label
CAUTION!
Do not attempt to raise the vehicle by jacking
on locations other than those indicated in the
Jacking Instructions for this vehicle.
1. Remove the spare tire, jack, and tools from
storage.
2. Loosen (but do not remove) the wheel lug
nuts by turning them to the left, one turn,
while the wheel is still on the ground.
3. Assemble the jack and jacking tools.
Jack And Tool Assembly
Jacking Locations
4. For the front axle, place the jack on the body
flange just behind the front tire as indicated
by the triangular lift point symbol on the sill
molding. Do not raise the vehicle until you
are sure the jack is fully engaged.
Lift Point Symbol On Sill Molding
353