Custom Wood Door Panel - Jenn-Air JUIFX15HX Installation Manual

INSTALLATION

CUSTOM WOOD DOOR PANEL

34 | INSTALLATION
! If stainless steel panel is installed, skip "Custom Wood Door Panel" section.
1
Remove screws and the top metal
bracket using the Phillips screwdriver.
Remove and place them aside. Skip
this step and go to the step 4 if the
door reversal has been completed.
2 Remove the top and bottom end caps
using the Phillips screwdriver and
place them aside.
3
Reinstall top metal bracket using
screws removed in the step 1.
4 Lightly press the custom panel onto
the door using double sided adhesive
tape. Adjust height of the panel to
align with the adjacent cabinetry. Press
the panel firmly against door.