Siemens 6GK1 901-1GB01 System Manual page 14

Instructions for fitting connectors, attachments and devices
2.3 Electrical networks
Procedure
The IE FC RJ-45 plug PRO consists of
the following:
a - Catch

b - Contact holder

c - casing

d - Seal

e - Sealing ring

f - Forcing nut

5. Place the cable in the stripping tool.
The index finger of your left hand is
the limit stop.
6. Tighten the stripping tool
14
1. In the stripping tool, use the yellow
knife cassette (12 mm).
2. If necessary, adjust the cutting
depth of the knife cassette using the
middle socket-head screw
7. To strip the insulation, turn the tool
in the direction of the arrow
– approx. 4 times for PVC
insulation
– approx. 8 times for PUR
insulation
3. Take the stripping tool in your right
hand.
4. Place the cable on the measuring
template.
Use your left index finger as the
limit stop
8. Remove the cable jacket, shield
and the white filler with your hand.
Passive network components
System Manual, 02/2013, C79000-G8976-C282-01