Explosion Hazards - Generac Power Systems Mobile Link Installation And User Manual

Safety
at any time when utility is lost. When this
occurs, load circuits are transferred to the
STANDBY (generator)
Before working on this generator (for
inspection, service, or maintenance), to
prevent possible injury, always set the gen-
erator to the OFF mode and remove the
7.5A fuse from the generator control panel.
• Verify all appropriate covers, guards and
barriers are in place, secured, and/or
locked before operating the generator. If
work must be done around an operating
unit, stand on an insulated, dry surface to
reduce potential shock hazard.

Explosion Hazards

DANGER
Explosion and fire. Fuel and vapors are extremely
flammable and explosive. No leakage of fuel is
permitted. Keep fire and spark away. Failure to do
so will result in death or serious injury.
DANGER
Explosion and Fire. Fuel and vapors are extremely
flammable and explosive. Store fuel in a well
ventilated area. Keep fire and spark away. Failure
to do so will result in death or serious injury.
WARNING
Explosion and fire risk. Do not smoke near unit.
Keep fire and spark away. Failure to do so could
result in death, serious injury, or property or
equipment damage.
Verify no combustible materials are left in
•
the generator compartment or on or near
the generator as FIRE or EXPLOSION may
result. Keep the area surrounding the gen-
erator clean and free from debris.
Gaseous fluids, such as natural gas (NG)
•
and liquid propane (LP) gas, are extremely
EXPLOSIVE. Install fuel supply system
according to applicable fuel-gas codes.
Before placing the home standby electric
system into service, fuel system lines must
be correctly purged and leak tested accord-
ing to applicable code. Inspect the fuel sys-
tem periodically for leaks. No leakage can
be permitted.
6
power source.
(000192)
(000143)
(000282)
Installation and User's Manual for Mobile Link