Software Installation - Ubiquiti UniFi UAP User Manual

UniFi Controller User Guide
®

Software Installation

The UniFi Controller software is installed just once when
you initially create a UniFi network. UniFi APs can be
added at any time through the controller interface but
you do not need to go through the software installation
process every time you add another UniFi AP.
Download the UniFi Controller software from the Ubiquiti
Networks website.
1. Go to downloads.ubnt.com/UniFi.
2. Mac users should download UniFi.pkg, and Windows
users should download UniFi-installer.exe.
3. Follow the instructions for your computer type.
Mac Users
1. Launch UniFi.pkg.
Note: If UniFi.pkg is identified as coming from an
unidentified developer, then do the following:
1. Right-click UniFi.pkg and select Open.
2. Click Open.
3. Click Continue and follow the on-screen instructions to
install the software.
4. Go to Go > Applications and double-click the
UniFi icon.
Proceed to "Configuring the UniFi Controller Software"
on page 3.
Ubiquiti Networks, Inc.
PC Users
1. Launch UniFi-installer.exe.
2. Click Install.
3. If your computer doesn't have Java 1.6 or above
installed, you will be prompted to install it. Click Install
to continue.
4. Click Next.
5. Ensure that the Start UniFi Controller after installation
option is checked and click Finish.
Chapter 1: System Setup
2