Package Contents; Installation Requirements - Ubiquiti PowerBeam M5 Quick Start Manual

Table of Contents

Advertisement

Introduction
Thank you for purchasing the Ubiquiti Networks®
PowerBeam
™ 
you through installation and also includes warranty terms.

Package Contents

Antenna
Feed with Omni
U-Bolt
Gigabit PoE Adapter with
Mounting Bracket

Installation Requirements

• Phillips screwdriver
• 10 mm wrench
• Shielded Category 5 (or above) cabling should be used for
all wired Ethernet connections and should be grounded
through the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial-grade shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable
is designed for outdoor installations. It is the customer's responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.
Omni . This Quick Start Guide is designed to guide
Housing
Bolts (Qty. 4)
Rear
Mounting
Flange Nuts (Qty. 2)
Power
Cord
Bracket
Washers (Qty. 2)
High-Performance
airMAX
®
Omni
Model: PBE-M5-Omni
Quick Start
Guide
Pole Clamp

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pbe-m5-omni

Table of Contents