2.1 SAFETY PRECAUTIONS
Do not attempt to operate the freezer until the safety
precautions and operating instructions in the manual
are read completely and are thoroughly understood.
Take notice of all warning labels on the freezer (see Fig-
ure 2).The labels have been put there to help you main-
tain a safe working environment. The labels have been
designed to withstand washing and cleaning. All labels
must remain legible for the life of the freezer. Labels should
be checked periodically to be sure they have not been
SECTION 2
INSTALLATION INSTRUCTIONS
painted over, rubbed off, fallen off, and can be recognized
as warning labels.
If you are in need of replacement labels, indicate the part
number, type of label, location of label, and quantity re-
quired along with your name and address and mail to:
HEAT SENSITIVE THERMISTOR LOCATED
UNDER THIS COVER. TEMPERATURE
MUST NOT EXCEED 220°F NEAR
THERMISTOR. HEAT SINK MUST BE
USED WHEN BRAZING ON EVAPORATOR
OUTLET. CHECK RESISTANCE BEFORE
REMOVAL OF THERMISTOR.
SEE SERVICE MANUAL.
Figure 3. Warning Label Locations
3
Stoelting, LLC
Commercial Products
502 Hwy. 67
Kiel, WI 53042