Terminology - Siemens SIGMASYS C Manual

16.3

Terminology

Actuator Output
Addresses Physical number or numbers of an element (detector, transponder, indicator
panel) on a SIGMASYS monitored line
Alarm zone
Group of multiple detector zones in a fire section
(AZ)
Detector zone (MG) Group of detectors
DPU Printer Protocol Converter
Fire section Portion of a building which is structurally isolated from other building parts
or other buildings in order to obstruct the spread of fire for a defined length
of time
GMG-S Module for connecting threshold detection system elements
LPC Loop Periphery Controler
MPC Connection module for SIGMALOOP – spur monitored lines
(Multifunctional Peripheral Controller)
PMG-S Module for connecting pulse-polling system elements
SAC PCB for monitoring the system peripherals and power supply
(System Alarm Controller)
SCI Interface to third-party computer
(Standard Communication Interface)
SOC SIGMASYS M processor module
(System Organisation Controller)
SOP SIGMASYS Operation Panel
TR-APL Transliner connection plate
U-APL Switch connection plate
Multifunctional Danger Control and Indicating Panels SIGMASYS C and M (M-Modules)
Best.Nr. A24205-A337-B970 – Edition 12 (03/07)
16 Appendix
121 / 128