Follett Horizon Elite 1010 Series Installation Instructions Manual page 5

2.3
Electrical connections at contactor
Single Phase
POWER SUPPLY
230-60-1
Three Phase
POWER SUPPLY
230-60-3
2.4
Condensing unit refrigeration line-set connection point
(Tecumseh unit shown, but location is same for all units)
REMOTE CONDENSING UNIT
• Electrical disconnects required within 10' (3 m) for all hard wired
ELECTRICAL
DISCONNECT
• Install in accordance with NEC and local electrical codes.
L3 T3
L2 T2
L1 T1
GRD
COMPRESSOR CONTACTOR
NC AUXILIARY SWITCH
CRANK CASE
HEATER
• Electrical disconnects required within 10' (3 m) for all hard wired
ELECTRICAL
connections.
DISCONNECT
• Install in accordance with NEC and local electrical codes.
L3 T3
L2 T2
L1 T1
GRD
CRANK CASE
HEATER
connections.
COMPRESSOR
CONTACTOR
COMPRESSOR
CONTACTOR NC
AUXILIARY SWITCH
L1 L2 L3
T1 T2 T3
L1 L2 L3
T1 T2 T3
1010/1410:
5/8" suction
3/8" liquid
5