Follett Horizon Elite 1010 Series Installation Instructions Manual page 8

3. Install hail hood (5) to brackets using the
remaining six screws (6).
Note: The bottom hole in the bracket is not
used when mounting the hail hood (7).
5.1
Install hail hood (Larkin units only)
1. Hail hood comes factory
mounted. To remove hood for
condenser cleaning, please
remove the four (4) hex head
screws. Reinstall after cleaning
using the same four screws.
8
Hex Head
Screws
6
5
7
NOT USED
REMOTE CONDENSING UNIT