Tractor Forward Speed; Cutting Sequence - Spearhead Excel 606 Handbook

Tractor forward speed

Cutting sequence

Excel 606, 686, 726 & 836
Too high a forward speed will impair the finish,
leaving it looking ragged, and cause over frequent
use of the break back, which will overheat the oil.
A slower forward speed improves the standard of
the finish.
Cut field side and bottom of hedge first
Cutting hedge from roadside
Warning
Never operate with flail rotor facing
towards the tractor. This is potentially
dangerous with debris being thrown
towards the tractor, and unseen
hazards may cause damage.
Spearhead
.
31