Switching Modes - Pure Clean PUCRC850 User Manual

SWITCHING MODES

Standby Mode:
The power is turned on, the indicator light ashes green, and the robot is standby.
Sleep Mode:
The power is turned on, Control button is o , and the robot is at rest.
Working Mode:
The robot is working; indicator light is in green all the time, enter cleaning mode.
Operating Procedure:
Sleep mode-Standby mode-Working mode
Startup:
1. Make sure the power switch on the side of the robot is turned ON.
2. Press the Control button or the Cleaning mode on the remote controller to start
the robot.
Pause:
The pause function is to switch the robot from the operating mode to the
selected mode, and the robot can be paused by the following operations:
1. Press the Control button on the robot to pause the robot.
2. Press the power ON/OFF button on the remote controller to pause the robot.
Sleep:
Sleep mode means that the robot is stopped and the indicator light is o .
If the Robot is not active within 3 minutes, the robot will enter Sleep mode
automatically.
Note: If the robot is out of service for a long time,pls turn o the power switch.
17
www.PyleUSA.com