Installing Belt Cleaner And Tensioner; Locating And Cutting Mounting Holes - Martin QC1 Operator's Manual

Installing Belt Cleaner and Tensioner

Locating and
cutting mounting
holes
Martin Engineering M3722-11/12
®
Martin QC™ Pre-Cleaner with Metal Tipped Blade should
NOT be used on belts with mechanical fasteners. It is intended
to be used only on Vulcanized Belts. When used on belts with
mechanical fasteners, damage may occur to both the belt and
the cleaner assembly. The cleaner should NOT be used on a
belt that contains gouges, holes, or other belt imperfections, as
the cleaner may cause further damage to the belt.
1
2
4
CAUTION
!
®
Martin QC1™ Cleaner XHD with Metal Tipped Blade