Table of Contents
Advertisement
5.2.3
© Martin Engineering GmbH
Installing the cleaner
WARNING! RISK OF INJURY!
The secondary cleaner is heavy and can cause serious injuries if it
is dropped during lifting or moving.
Always use a suitable lifting device or engage the help of several
persons when lifting the brush cleaner. Do not stand under
hanging loads.
NOTE
Check the oil level in the angled gearbox of the motor before
installing.
Observe the information in the manufacturer's documentation
supplied with the device.
1. Fix the pillow block (3, Fig. 4) on both sides of the main shaft
(2, Fig. 4) .
Fig. 3:
2. Slide the main axle (2, Fig. 4) though the two slots (4, Fig. 4) in
chute wall.
3. Secure the pillow blocks (3, Fig. 4) using the bolts (5, Fig. 4) to
the tensioners (6, Fig. 4).
4. Insert the feather key into the axle, if not already done.
1
3
2
6
17
4
5
M3289UK-01/17
Advertisement
Table of Contents
