Parker Compumotor AT6200 Installation Manual page 7

AT6n00 Indexer: CE Compliance
ii AT6200/AT6400 Installation Guide
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Product Type: AT6200-120/240, AT6400-AUX1-120V, and AT6400-AUX1-240V
The above products have been demonstrated to be CE compliant, per the following directives,
when installed according to the instructions in Appendix A of this Installation Guide.
• 89/336/EEC Electromagnetic Compatibility Directive (EMC)
• 72/23/EEC Low Voltage Directive (LVD)
• 93/68/EEC CE Marking Directive
AT6n00 Indexers, when installed according to just the procedures in the main body of this
Installation Guide, may not necessarily comply with the LVD or EMC directives. To install
an AT6n00 Indexer so that it complies with the LVD and EMC directives, you must follow
the additional procedures described in Appendix A, under CE Installation Instructions. In some
installations, additional measures may be required. If you do not follow these instructions,
the protection of the product may be impaired. The ultimate responsibility for ensuring that
the CE requirements for the system are met rests with the system builder.
This CE compliance is valid for units with Serial Numbers 971101xxxx and greater. It is
also valid for Serial Numbers prior to this if the CE sticker is present on the unit.
Note: The AT6200-AUX1-DC and AT6400-AUX1-DC versions of the AT6n00 have not been
demonstrated to be CE compliant. Following the installation instructions in Appendix A will
improve performance, but does not ensure CE compliance for the AT6200-AUX1-DC and
AT6400-AUX1-DC.