Advertisement
The SBC-410's PC/104 connectors give you the flexibility to
attach PC/104 expansion modules. These modules perform the
functions of traditional plug-in expansion cards, but save space
and valuable slots. Modules include:
• PCM-3600
• PCM-3420
• PCM-3200
• PCM-3810
• PCM-3820
• PCM-3115
• PCM-3610
• PCM-3660
• PCM-3718
• PCM-3724
• PCM-3910
To install these modules on the SBC-400 is a quick and simple
operation. The following steps show how to mount the PC/104
modules:
Step 1
Step 2
Step 3
68 SBC-410 User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
FAX/Modem Module
Fast SCSI-2 Module
Sound Module
Solid State Disk Module
High Density Flash Disk Module
PCMCIA Module (two slots)
Isolated RS-232 and RS-422/485 Module
Ethernet Module
30 KHz A/D Module
48-channel DIO Module
Breadboard Module
Remove the SBC-410 from your system paying
particular attention to the safety instructions already
mentioned above.
Make any jumper or link changes required to the
CPU card now. Once the PC/104 module is mounted
you may have difficulty in accessing these.
Normal PC/104 modules have "male" connectors
and mount directly onto the main card. However,
for reasons that ensure better bus matching, the
connectors on the SBC-410 and the PC/104 module
are both "female". For this reason you need to plug-
in a "male-male" adapter connecter (included with
the SBC-410). Please refer to the following PC/104
module mounting diagram on the following page.
After this is in place you then have the correct
mounting connector to accept your PC/104 module.
Advertisement
