Advertisement
• CPU: Intel 486SX/DX/DX2/DX4/Pentium Over Drive;
AMD Am486DX/DX2/DX4/5x86;
IBM/SGS/Cyrix Cx486DX/DX2/M7/5x86;
TI 486DX2/DX4
• Bus interface: ISA (PC/AT) bus
• Data bus: 32 bit
• Processing ability: 32 bit
• Chipset: ALI 1489/1487
• RAM memory: 1 MB to 64 MB, two 72-pin sockets
• Shadow RAM memory: Supports system and video BIOS up
to 256 KB in 32 KB blocks
• L2 Cache memory: On-board 128 KB, up to 512 KB (DIP package)
• Enhanced IDE HDD interface: Supports up to four enhanced IDE
(ATA-2 bus) large hard disk drives or other enhanced IDE devices.
Supports mode 3 and mode 4 hard disks (minimum data transfer
rate of 11.1 MB/sec).
• Floppy disk drive interface: Supports up to two floppy disk drives,
5.25" (360 KB and 1.2 MB) and/or 3.5" (720 KB, 1.44 and 2.88 MB).
• Bi-directional parallel port: SPP/EPP/ECP standards.
• Serial ports: One serial RS-232 port and one serial RS-232/RS-422/
RS-485 port, jumper selectable. Both with 16C550 UARTs with
16-byte FIFO buffer.
• IRQ SELECTION FOR COM PORTS:
COMA: Supports COM 1/2/3/4 & address is selectable;
COMB: Supports COM 1/2/3/4 & address is selectable;
• BIOS: AMI Flash WinBIOS
• Watchdog timer: The time interval is software selectable from 2 to 32
seconds (15 steps, 2 seconds per step). Can generate a system reset or
IRQ15.
• PC/104: 104-pin connector for a 16-bit bus
4
SBC-410 User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
