Advertisement
To install the CPU, follow the instructions that came with it. If no
documentation is provided, the general procedure for installing a
CPU are outlined below:
1. Lubricate the pins on the CPU with lubricant for PGA devices.
2. Carefully align the CPU so that it is parallel to the socket.
3. Gently push the CPU into the socket. There will probably be a
When you install a new CPU, you may have to adjust other
settings on the board, such as CPU type, CPU clock and PCI
speed, to accommodate it. Make sure that the settings are correct
for your CPU. Improper settings may damage the CPU.
14 SBC-410 User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This makes the CPU slide in much easier and greatly reduces
the chance of damaging the pins and other components.
Make sure that the notch on the corner of the CPU matches
the notch on the inside of the socket.
small gap between the CPU and the socket even when it is
fully seated. DO NOT USE EXCESSIVE FORCE!
Advertisement
