Technical Specifications
Technical Specifications
Specifications
Technical
Technical
Specifications
Electric Direct
Direct Drive
Drive Agitators
Agitators
Electric
Electric
Direct
Drive
Agitators
Motor Power
Motor Hazardous Location Approvals
Motor Electrical Requirements
Maximum Recommended Agitator Shaft Speed
Minimum Recommended Motor Speed**
Weight (Motor, Bearing Housing, Shaft, Blade)
Wetted Parts
Maximum Allowable Process Fluid Temperature
Recommended Maximum Material Viscosity
Noise Data (Sound Pressure Level)
Ambient and Operating Temperature Range (limited
by motor)
* See
Finding the Proper Agitator Speed, page 10
** The minimum recommended speed is based on an operating environment temperature of 72° F (22° C). Higher
environmental temperatures may require higher speeds for adequate motor cooling.
22
UL: Explosion Proof Class 1 Group C&D
ATEX/IECEx : Ex II 2G Ex d IIB T4 Gb (see
declarations included with motors)
UL: 230/460 VAC, 60 Hz, 3 Phase
ATEX/IECEx: 230/400 VAC, 50 Hz, 3 Phase
2 hz, 58 rpm (UL), 2 hz, 56 rpm (ATEX/IECEx)
32° F to 104° F (0° C to 40° C)
for instructions on calculating agitator speed.
UL: 3/4 hp;
ATEX: 0.37 kW
Class 2 Group F&G T3C
500 rpm*
55–65 lb. (25–30 kg)
300 series SST
194° F (90° C)
300 cP
Less than 75 dBA
3A4553F