Installation and Operation Guide SOLECTRIA XGI 1000 (Rev D)
Use M10 or 7/16 in. bolts to attach the mounting bracket to the mounting surface. Use 4 bolts corresponding to
the holes shown in Figure 3-4. In the background, the inverter is visible in gray for alignment purposes. The top
of the mounting bracket is 19.7 in (502 mm) below the top of the inverter. Torque the bolts as necessary to
support the weight, depending on the material of the mounting surface.
Figure 3-4 Mounting Bracket
DOCR-070733-D
Page 17 of 86