Table of Contents
Advertisement
Installation and Operation Guide SOLECTRIA XGI 1000 (Rev D)
WiFi Configuration
This screen allows a user in administrator mode to define the SSID for a cluster of inverters. The SSID has 3
components: Site ID, Cluster ID, and Channel. The format of the SSID becomes [Site ID]-[Cluster ID]-[Channel],
as shown at the bottom Your New WiFi Network Name (SSID).
Site ID: Used to define a unique name to identify the site.
Cluster ID: Used to define a unique name for separate clusters on a single site. For large sites separate the
inverters into multiple clusters with each cluster having a unique ID.
Channel: Used to select a WiFi channel, choose from the drop-down menu. If the network seems slower than
accessing a page when connected to the Internet, try changing the channel as the channel selected may have
other devices on it. Use of a WiFi analyzer tool or app may help.
The WiFi Network can be disabled by deselecting the "Enable your WiFi network" check box.
These changes apply to all inverters in the detected cluster unless the "Save your changes to all inverters in the
cluster" checkbox is deselected.
DOCR-070733-D
Disabling WiFi Network
Do not disable the WiFi unless you have a computer with an Ethernet cable attached to
the inverter as all WiFi communications will cease once disabled.
Figure 5-28 WiFi Configuration
Page 61 of 86
Advertisement
Table of Contents
