Horizon Fitness GR6 Service Manual page 6


Tension control and Emergency lever
The preferred level of difficulty in pedaling (resistance) can be regulated in fine increments by
use of the tension control knob. To increase to resistance, turn the tension control knob
clockwise. To decrease the resistance, turn the knob counter clockwise.
Important:

To stop the flywheel while pedaling, push down on the red emergency brake lever.

The flywheel should quickly come to a complete stop.

Make sure your shoes are fixed into the toe clip.

Apply full resistance load when the bike is not in sue to prevent injuries due to moving
drive gear components.
Warning:
The indoor cycle does not have a free moving flywheel; the pedals will continue to move
together with the flywheel until the flywheel stops. Reducing speed in a controlled manner is
required. To stop the flywheel immediately, push down the red emergency brake lever. Always
pedal in a controlled manner and adjust your desired cadence according to your own ability.
Push the red lever down=emergency stop.
The indoor cycle uses a fixed flywheel that builds momentum and will keep the pedals turning
even after the user stops pedaling or the user's feet slip off. Do not attempt to remove your feet
from the pedals or dismount the machine until both pedals and flywheel completely stop.
Failure to follow these instructions may lead to loss of control and the potential for serious
injuries.
6