Outer Chain Guard Replacement - Horizon Fitness GR6 Service Manual

4.3 OUTER CHAIN GUARD REPLACEMENT


Symptom: Outer chain guard damaged or noise

Tools required: Combination Wrench; Philip Screwdriver

Solution:
I. Disassemble the left and right pedal using a 13~15mm Combination Wrench. Pull
off the stripe of the sweating cloth.
Note: Counter clockwise loosen the right pedal and clockwise loosen the left pedal.
II. Remove 3 bolts fastened on the chain guard and then remove the chain guard.
III. Replace with a new chain guard. Reverse above steps to reassemble the indoor
cycle.
14