Samsung AM JXVHGH Series Installation Manual page 90

Pipe insulation
Insulate the distribution header
f Fix the distribution header with a cable tie and cover the connected part . X
f Insulate the distribution header and the welded part and wrap the connected part with X
an adhesive insulation tape to prevent dew formation .
Adhesive insulation tape
Insulate the refrigerant
Insulate the
pipe
distribution
header
f Fix the distribution header with a hanger after insulating it . X
Insulating the branch joint
f Tightly attach the insulator, provided with the branch joint, to the separately purchased insulator . Wrap the X
connected part with an insulator (separately purchased item) that has thickness of at least 10mm .
f Use an insulator that resist heat up to 120°C . Wrap the branch joint with an insulation that has thickness of at least X
10mm .
Pipe insulator
(Separately
purchased item)
Fix securely
without any gap .
150mm
Branch
joint
Thickness of the insulator (Separately purchased
item) should be thicker than 10mm .
90
DVM S HE_IM_DB68-05461A-08_EN.indd 90
Provided
Insulator
Fix securely without any gap .
Pipe insulator
(Separately
purchased item)
Insulate after welding a stopper
Adhesive insulation tape
Insulation tape (Separately purchased item)
Pipe
Pipe insulator (Separately purchased item)
❇ Attach the adhesive insulation
❇
tape to the pipe, as shown in the
picture, after insulating the pipe .
Insulation
2017-03-24 오후 1:38:42