Samsung AM JXVHGH Series Installation Manual page 80

Electrical wiring work
Examples of how to use the cable striper
<Cable striper>
1 . Adjust the blade position by coin . (Controller is at the bottom side of the tool .) Fix the
blade position according to the outer sheath thickness of the power cable .
2 . Fix the power cable and tool by using the hook at the top side of the tool .
3 . Cut out the outer sheath of the power cable by revolving the tool in the direction of the
arrow, two or three times .
4 . At this situation, cut out the outer sheath of the power cable by moving the tool toward
the direction of the arrow .
5 . Slightly bend the wire and pull out the cut part of the outer sheath .
Fixing the power cable
3 phase 4 wires
(380-415 V~)
ELCB
or
MCCB+
ELB
80
DVM S HE_IM_DB68-05461A-08_EN.indd 80
Sub unit communication cable
Sub unit 3 phase 380-415 V~
2017-03-24 오후 1:38:38