Despatcher Callback Requests - Tait Orca Manual

status call to your despatcher, simply dial:
0 ss, then
n
press the enter key ( ) or the hash key ( ).
n
One or more of the preset calls on your radio may be status
calls. To make preset status calls, dial the call as you would
a normal preset call.
The network will return a message confirming that your
status call has been received. When this message is received,
the display will read ACCEPTED and the radio will give a
two-second-long high-pitched beep.

Despatcher callback requests

If your fleet has a despatcher, you can send a message to the
despatcher requesting they call you back.
There are two ways to send a despatcher callback request.
Dial 0, then press the enter key ( ) or the hash key
n
( ).
Give a short press of the despatcher key ( ).
n
The network will return a message confirming that your
despatcher call has been received. When this message is
received, the display will read ACCEPTED and the radio
will give a two-second-long high-pitched beep.
To send a callback request to another despatcher:
dial 0 number, then
n
press the enter key ( ) or the hash key ( ),
n
where number is the other despatcher’s radio unit number.
If you wish to cancel a callback request you have made:
dial 0, then press the enter key ( ) or the hash key ( )
n
if you made the request to your own despatcher; or
dial 0 number, then press the enter key ( ) or the
n
hash key ( ), where number is the other despatcher’s
radio unit number.
32 32 32 32 32