Summary Of Radio Indicators - Tait Orca Manual

Summary of radio indicators

LED:
steady red steady green
flashing red flashing green
Sound:
pitch: high
duration: short
Display messages are shown in ALLCAPS, e.g. QUEUED
Display Sound Meaning
+ flashing
+ flashing
medium +
slow +
x 3
1.5 sec
slow +
medium
+ flashing
x 5
WAIT
every
1.5 sec
(continued on next page)
steady amber
flashing amber
medium low
long ... sound repeats
The radio is transmitting.
The radio is transmitting at low power.
Low power transmit is active.
Handset mode is active.
A function has been turned on.
A function has been turned off.
The transmit timer is about to expire.
In 10 seconds, the radio will stop
transmitting. Release the PTT key
before transmitting again.
The radio has stopped transmitting
because the transmit timer has
expired. Release the PTT key before
transmitting again.
The radio has access to a network and
is ready to make or accept calls.
The radio does not currently have
access to a network. It is attempting to
find a site it is authorised to use, or is
out of range of a network signal.
The current operation has been
cancelled at your request.
The system is setting up an incoming
call. Give a brief press of the PTT to
accept the call.
15 15 15 15 15