Calls Not Connected - Tait Orca Manual

Calls not connected

If your call is not connected, your radio will respond with
one of the following messages.
If the display reads ENGAGED and the radio gives a
n
series of long, low-pitched beeps, the party you are
calling is already busy. Try your call again later.
If the display reads QUEUED and the radio gives a long,
n
low-pitched beep, the party you are calling has queued
your call. Wait for the other party to call you back, or
try your call again later.
If the display reads SYS BUSY and the radio gives a
n
long, low-pitched beep, the system is too busy to handle
your call. Try your call again later.
If the display reads NOT HOME and the radio gives a
n
long, low-pitched beep, the party you are calling has
their radio switched off, in do not disturb mode or is
out of range. Try your call again later.
If the display reads WAIT and the radio gives a series of
n
long, medium-pitched beeps, the system is not able to
connect your call straight away but will queue it and
connect it as soon as possible.
If the display reads UNAVAIL and the radio gives a long,
n
low-pitched beep, your radio is not permitted to make
the type of call you requested.
If the display reads UNOBTAIN and the radio gives a
n
long, low-pitched beep, the number you called is not
supported.
28 28 28 28 28