Advertisement
Quick Links
New Battery
Long Condition
Turn the radio off
off
Insert the
battery and/or radio
into the charger
Release the button
6
flashing
Long
Conditioning
Use for:
¨
first use of new battery
¨
poor battery performance
¨
after 2+ weeks storage
Press and hold the button
Wait for the amber light
flashing
Error Conditions
steady
up to
24 hours
100%
Charged
Battery Charger
User Guide
Before being fitted to a radio, a new (or stored) battery
must be fully charged using the Long Condition cycle.
Refer to “New Battery - Long Condition”.
flashing
battery fault - check the contacts
slow flash
power supply failure
steady
out of temperature range
ambient charging
temperature range
MBAT4-00-000-804
or
MBAT4-00-000-804
Advertisement
Related Manuals for Tait orca
Summary of Contents for Tait orca
-
Page 1: Battery Charger
Use for: Battery Charger New Battery ¨ first use of new battery ¨ poor battery performance User Guide Long Condition ¨ after 2+ weeks storage Before being fitted to a radio, a new (or stored) battery Turn the radio off must be fully charged using the Long Condition cycle. - Page 2 Use for: Weekly Maintenance Use for: Normal Charging ¨ ¨ normal battery recharge weekly maintenance Short Condition charging If interrupted, begin from Turn the radio off Turn the radio off Insert the battery or radio Insert the into the charger battery and/or radio into the charger Wait for the red light...
Need help?
Do you have a question about the orca and is the answer not in the manual?
Questions and answers