a. Unlock the controller canister release lever, and pull the release lever outward to release the controller
canister.
b. Using the release lever, pull the controller canister out of the controller-drive tray.
Figure 4. Removing and Replacing a Controller Canister
12. Invert the controller canister, and set it on a flat, static-free surface, with the release levers up.
ATTENTION Possible equipment damage – The controller slot cannot remain open for more than three
minutes because of the possibility of overheating the equipment. The controller air blocker fills the controller slot
so that the equipment does not overheat.
4 - Replacing a Battery in the E5660