Table of Contents
Advertisement
the Pi Softcam file from
http://www.dbnation.tv/showthread.php?t=19. This is
necessary only when the Pi image server is down or not
updated.
Note: To install Newcamd 6.01 right now you will need to
FTP 2 files to the DreamBox with DCC send.
1.
Download Newcamd 6.01 from
www.dreamboxworld.com
2.
Browse to the Newcamd\libcamdio\dreambox folder
where you unzipped the download on your PC and FTP
"libcamdio.so.0" to /var/lib on your DreamBox. Do the
same with libcrypto.so.0.9.7 which can be found on
your PC in Newcamd\libcrypto\ppc.
3.
Be sure to overwrite the key files found in
/var/tuxbox/scce with new keys or Newcamd will not
work.
Section 16
You will need to scan any satellite of interest that is not listing
in the DB Nation Service List. Any information about a specific
satellite contained in a service list will be deleted and replaced
by your scan of that same satellite.
Tip: Current images will not scan DISH at all and scan Bell
ExpressVu poorly. Use the DB Nation Service List if possible.
Procedure:
1. Press the "Menu" button to bring up the toolbar at the
bottom of the screen. Look for the setup icon and press
OK. Go to "Service Searching" then "Automatic
Transponder Scan".
2. Scroll down to "Network" and select you satellite of
interest from the drop down menu.
3. Press the
the "start scan" box and begin the scan.
Scanning Satellites
Green
button or the down arrow button to
and unzip.
Advertisement
Table of Contents
