DREAM MULTIMEDIA DreamBox 500 Manual For Correct Setup page 28

Now that you an expert and want more than 4 satellites you
may want to extrapolate these directions to 8 (or even more)
satellites if you have a T90.
For 8 Satellite positions:
- 1 Spaun DiSEqC uncommitted switch - SUR 220F or 420F
- 2 Spaun DiSEqC switches - SAR 411F
- 8 LNBs
LNB Toneburst DiSEqC
0 None
1 None
2 None
3 None
4 None
5 None
6 None
7 None
Tips:
• LOF/H is 11250 for circular LNBs like we use for DISH,
DirecTV, and Bell ExpressVu. (No, the DreamBox cannot
receive DirecTV.
• LOF/H is 10600 or 10750 for linear LNBs like we use for
97, 105, and 121. (Standards are 10750; Universals are
10600)
• If your RG6 run is fairly long, adding 'Repeat' of 'one' on
the page with DiSEqC 1.1 settings will help.
Go to http://www.dreamboxfornewbies.org/wiring.htm
diagrams explaining how to wire different combinations of
satellites and LNBs with a fixed dish.
B. Rotor Dish Configuration
DiSEqC
Mode Parameter
1.1 A/A
1.1 A/B
1.1 B/A
1.1 B/B
1.1 A/A
1.1 A/B
1.1 B/A
1.1 B/B
Switch Swap
Input Command
1 +
1 +
1 +
1 +
2 +
2 +
2 +
2 +
for