Table of Contents
Advertisement
need to do in 'Satellite Configuration'. Right now there is
not a rotor version.
Satellite Configuration for those with Rotors
Procedure:
1. Using the remote control press "Menu" and go to
Settings then Service Searching then Satellite
Configuration.
2. Choose "many satellites via DiSEqC Rotor" from the
top drop-down menu.
3. Let's make the circular polarized LNB = LNB0 and the
linear LNB = LNB1.
4. Choose your first desired satellite – 119W in this
example because it has a very strong signal.
5. Select LNB0 and press the OK button. Do not make
any other changes to this page.
Advertisement
Table of Contents
