Table of Contents
Advertisement
2. You will see the DiSEqC Configuration screen next but we
are not ready to do this yet so press the "Exit" button
several times.
3. Press the "Menu" button and go to "Setup". Now press
the "Menu" button on your remote and find "Setup" then
"System Settings" and finally "AV Settings" and choose
the correct configuration for your TV. i.e. RGB, SVideo.
The incorrect choice may give you black and white
viewing. (The Pi Menu is shown below.)
4. Go to "System Settings" to make sure you have all your
"A/V Settings" are correct.
Advertisement
Table of Contents
